0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools

0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools
0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools
0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools
0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools
0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools
0 8KW Water Cooled Spindle Motor kit 800W Water Cooling Spindle 4 Bearings Dia 65mm 1 5KW Inverter VFD 75w Water Pump Collet in Machine Tool Spindle from Tools

Product Specification

Drive: Motor

Model Number: 220V 800W ER11 Water Cooled Spindle & Inverter & Clamp

Application: Milling

Maximum Torque: 0.32Nm

Operating Speed: 0-24000rpm

Brand Name: G-PENNY MACHINE

Size: 65x195mm (65mm diameter)

Voltage: 220V / 380V

Power: 800W (0.8KW (1HP=735W))

Cooling: Water cooled

Bearing Type: 2x 7002C P4 DT & 2x 7000C P4 DT

Collet: ER11

Frequency: 400Hz

Clamp: 65mm

Inverter Type: 220V 1.5KW 400Hz

Water Pump Type: 220V 75W 3200L/H

Description:

主轴+变频器+夹具+水泵详情页_01主轴+变频器+夹具+水泵详情页_02

1 & 800w ER11 Water Cooled Spindle 4bearings 65x195mm

1 & 220v 1.5w VFD/Inverter

1 & 65mm Mount Bracket

1 & 75w Water Pump

1 & 5m tube主轴+变频器+夹具+水泵详情页_04主轴+变频器+夹具+水泵详情页_05主轴+变频器+夹具+水泵详情页_06

Basic Parameters of Spindle:

  • Size: 65x195mm ( Body diameter:65mm;  Length:195mm )

  • Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

  • Cooling: Water cooling 

  • Power Interface: Optional H17-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. (Pay attention! our spindle "4" connecting to GND,promised personal safety!!)

  • Power: 0.8kw (1HP=0.735kw)

  • Voltage: 220V/380V AC (If you need 110V spindle, please leave message to us, thank you)

  • Frequency: 0-400Hz

  • Speed: 0-24000rpm

  • Runout Off: 0.01mm

  • 4pcs angular contact ball bearings

  • Bearing Type: 2×7002C P4 DT & 2 ×7000C P4 DT

  • Water Cooling ER11 collet chunk

  • Grease Lubrication

  • Main Application:  Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working. (Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)

主轴+变频器+夹具+水泵详情页_08Basic parameters of Inverter:

  • Length: 125mm  Width:163mm  Height:175mm

  • Inverter Type: 220V 1.5KW

  • Input Voltage: 220V(+/-15%), We also stock 380V(+/-15%), please contact us

  • Output Voltage: 220vAC

  • Input Frequency: 48-63 Hz

  • Output Frequency: 0-400 Hz

  • Input Phase: 1 or 3 phase

  • Output Phase: 3 phase  

  • Warranty: 1 year from the date you purchased

主轴+变频器+夹具+水泵详情页_10Diameter:    65mm

Material: Cast Aluminium

 

 

Features: 

  • Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.

  • Inner wall is very smooth,  outer walls is sandblasted, relatively fine uniform,  but not very smooth.

  • Cast aluminium fixture is much heavier than aluminium profile fixture.

 

Product Description:
  • Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.

 

Usage:

  • Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.

主轴+变频器+夹具+水泵详情页_12Basic Parameters of Water Pump:

  • Max Head: 3.2 m;

  • Power: 75w;

  • Maximum flow: 3200L / H

  • Plug Cord Length: 1.4m

  • Voltage: 220V;

  • Frequency: 50 HZ

  • Outlet size: 4 and 6 mm;

  • Dimensions: 145 * 110 * 90 mm

主轴+变频器+夹具+水泵详情页_14主轴+变频器+夹具+水泵详情页_15主轴+变频器+夹具+水泵详情页_16主轴+变频器+夹具+水泵详情页_17主轴+变频器+夹具+水泵详情页_18主轴+变频器+夹具+水泵详情页_19主轴+变频器+夹具+水泵详情页_20主轴+变频器+夹具+水泵详情页_21主轴+变频器+夹具+水泵详情页_22主轴+变频器+夹具+水泵详情页_23主轴+变频器+夹具+水泵详情页_24主轴+变频器+夹具+水泵详情页_25主轴+变频器+夹具+水泵详情页_26主轴+变频器+夹具+水泵详情页_27主轴+变频器+夹具+水泵详情页_28Spindle:

P4 fully sealed angular contact bearings ,2×7002C P4 DT &2×7000C P4 DT, increase spindle life .

Longer length make the torque bigger,more powerful. 

Carefull assembly make the spindle more precisional. 

Precision 0.01mm.Coaxial degree less than 0.0025mm 

Shipment within 4 days,promise the delivery time. 

We are the spindle manufacturer, we offer only best quality and best price to you. 

Pay attention: The spindle size is 65x195mm, bigger torque. 

The voice of the spindle is very low,almost no vibration. 

 

Frequency converter:

1. PID control;advanced calculous PID closed-loop arithmetic.quick responding speed and high suitability.

2. 2.Easy PLC function can realize 16 legs of speed and inverter control function.

3. 3.Rs485 communication can realize 16 legs of speed and inverter control function.

4. 4.With extremely strong anti-jamming capability。

5. Low output ratting torque 0.5HZ-150%,low speed running ability.

6. Carrier adjustable by 16KHZ. completely soundless working environment.

7. Broad voltage working area,normal running in 3.4v-456v

8. Auto voltage regulation (AVR) technique , for ensuring the inverter load capability.

9. Various control technique by both synchronization znd non-synchronization,dynamically realize fast starting without changing brakes.

10. With perfect error protection and short circult starting protection capability.

11. Eead-time compensation and auto torque slip compensation function ,can realize 180% high orque output at low frequency 0.25HZ

12. Unique EMC desige,can minimize inverter's pollution to power.

13. Overall reinforcement layer to suit all kinds of harsh enviroment.

 

Bracket:

Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform. 

Inner wall is very smooth,  outer walls is sandblasted, relatively fine uniform,  but not very smooth. 

Cast aluminium fixture is much heavier than aluminium profile fixture. 

Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity. 

 

Water Pump:

High Lift           Large Flow Rate          Highly Durable            Excellent Insulation 

Can cool the machine quickly             Good quality and long life 

Large inventory                                    Big strong power 

 
 

主轴+变频器+夹具+水泵详情页_30Spindle:

Spindle working environment temperature is usually -10  ~ 40 .
Before installing the first electric spindle axis head turned by hand, should feel flexible, non-blocking phenomenon.
 
Frequency converter:
1 The voltage level is consistent with the control motor.
2 The rated current of the motor should not exceed the rated (output) current of the selected inverter. Generally, the motor current is 1.1 to 1.5 times.
3 Select the type of inverter according to the load characteristics of the controlled device.
 
Water Pump:
Must be used in the water. 

Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.主轴+变频器+夹具+水泵详情页_32Spindle:

Spindle in the preservation and transportation, high-speed grease inside the bearing state will change, customers should be running at low speed for 30 minutes. 3000 rpm and then follow the poor increase, run 20 minutes each. Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter. 
Connect the inverter spindle, three-phase inverter power cord should be soldered in the plug 1 (U), 2 (V), 3 (W) feet, 4 feet for the ground. After the power is turned on, to observe whether the spindle rotation axis indicates the direction consistent. If inconsistency should be immediately shut down, replace the inverter and spindle connected two wires of three-phase power supply. 

It should ensure that before use of water-cooled spindle, the cooling system is working properly. Every day before using the spindle must be running at low speed for 15-20 minutes. Clamping the cutters to spindle, collet nuts ,collets,cutters must be clean enough. 主轴+变频器+夹具+水泵详情页_34主轴+变频器+夹具+水泵详情页_35主轴+变频器+夹具+水泵详情页_36主轴+变频器+夹具+水泵详情页_37主轴+变频器+夹具+水泵详情页_38Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken. 

AC spindle motor MUST use with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once. 
When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings. 
  

If you don't know how to set up the inverter or connect the spindle to inverter,please contact us.We will help you to set up it.主轴+变频器+夹具+水泵详情页_401. Cooling in different ways: water-cooled spindle motor is the use of the water cycle to cool the heat generated after the high-speed rotating spindle, spindle motor with fan-cooled approach to cooling. 

2. Noise: Water-cooled spindle motor is basically no noise, but the air-cooled spindle motor is very loud. 
3. Life aspects: Water-cooled spindle motor pay attention to maintenance, frequently changes the water or the use of industrial water coolers, air-cooled spindle fan mainly by the wind blowing the heat transferred to the heat sink, so as to achieve the cooling effect. 

4.If you need use for metal ,hard wood,granite,stone,you can choose metal spindle.Metal spindle much better than wood spindle. 主轴+变频器+夹具+水泵详情页_42主轴+变频器+夹具+水泵详情页_43Spindle from the production - assembly - test, and finally the perfect packaging .  

We will 100% guarantee security to the hands of the guests. 主轴+变频器+夹具+水泵详情页_45主轴+变频器+夹具+水泵详情页_46主轴+变频器+夹具+水泵详情页_47Shipping Cost

Our products are sold worldwide.
If you need many items in the same time, please contact us in advance to confirm shipping cost.
  
Payment:
We accept paypal credit, bank transfer, western union etc. 
Payment must be made within 7days calendar days of the auction end time.
  
Problem and Feedback:
PLEASE DON'T leave any negative feedback before you contact us.
We are honest and helpful supplier , we will try our best to solve problems with you.
Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback. 
Thanks very much in advance.
  
Refund:
If you are NOT SATISFIED with our package like the products is damage, please do not sign it and contact us immediately.
If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.
  
Note:
We can produce the product according to our customer's design. 
If you need something is very special, please contact us about it.

We are willing to help you about it.主轴+变频器+夹具+水泵详情页_49主轴+变频器+夹具+水泵详情页_50

Search:

sale 2017 spindle 220v 800w er11 water cooled spindle motor ...

sale 2017 spindle 220v 800w er11 water cooled spindle motor cooling 0 8kw vfd inverter variable #variable #speed #drives.
https://www.pinterest.com/pin/613896992929227977/

Water cooled spindle kit 800w water cooling spindle 4 bearings ...

Cheap 0.8kw water cooled spindle, Buy Quality water cooled spindle directly from ... output voltage and adjust the operating frequency can be achieved 0- 24000 ...
https://www.aliexpress.com/item/Water-cooled-spindle-kit-800w-water-cooling-spindle-4-bearings-65mm-diameter-0-8kw-spindle/32849399095.html

TDK-Lambda Americas LC1202 Series Capacitor Charging Power ...

Water Cooled High Voltage Capacitor Charging and DC Power Suplies Output Voltages: 0-1kV to 0-30kV at 12kJ/sec average power or 15kW DC Click here to ...
https://www.us.tdk-lambda.com/hp/product_html/lcpower.htm

Online Shop 0.8kw water cooled spindle cnc high speed router ...

0.8kw water cooled spindle cnc high speed router motor 65mm er11 800w spindle motor 4pcs bearing 24000RPM runout off less than on sale at reasonable  ...
https://www.aliexpress.com/item/0-8kw-water-cooled-spindle-cnc-high-speed-router-motor-65mm-er11-800w-spindle-motor-4pcs/32866079793.html%3Fws_ab_test%3Dsearchweb0_0,searchweb201602_0_10130_453_454_10618_536_317_537_319_10059_10696_10084_10083_10547_10546_10887_10307_321_10548_322_10065_10068_10103_10884_10545,searchweb201603_0,ppcSwitch_0%26algo_pvid%3De635ae21-7d0a-4b93-895a-dcc868a34d14%26algo_expid%3De635ae21-7d0a-4b93-895a-dcc868a34d14-18

0.8KW WATER COOLED DIAMETER 65MM SPINDLE MOTOR ...

24000RPM CNC MILL 1.5KW WATER COOLED SPINDLE MOTOR ER16 ... Image is loading 0-8KW-WATER-COOLED-DIAMETER-65MM-SPINDLE-MOTOR -.
https://www.ebay.com/itm/0-8KW-WATER-COOLED-DIAMETER-65MM-SPINDLE-MOTOR-MATCHING-INVERTER-VFD-HOT-ITEM-/252032465935

More effective energy-saving through use of an inverterpump Water ...

The water-cooled thermo-chiller which does not use a com- ... Operating conditions: 60°C, 0 kW with 50% load, 8 kW with 50% load. Current model. Comparison ...
https://content2.smcetech.com/pdf/HRW.pdf

FOUR BEARING 0.8KW WATER COOLED SPINDLE MOTOR ...

CNC MILLING HY WATER COOLED 2.2KW SPINDLE MOTOR AND DRIVE ... Image is loading FOUR-BEARING-0-8KW-WATER-COOLED-SPINDLE-MOTOR-.
https://www.ebay.com/itm/FOUR-BEARING-0-8KW-WATER-COOLED-SPINDLE-MOTOR-MATCHING-1-5KW-INVERTER-VFD-CNC-/252032466894

ZeroWater ZJ-003-IS ZJ-003 Avanti, 1-Pack, Cool ... - Amazon.com

FIVE STAGE WATER FILTRATION: unlike many water filters & pitchers, Zero Water filters use 5 stages of filtration, to bring you cleaner, better tasting water.
https://www.amazon.com/ZeroWater-Filtration-Electronic-Filters-Included/dp/B001CUQ0EW

UPDATED 0.8KW WATER-COOLED DIAMETER 65MM SPINDLE ...

HY WATER COOLED SPINDLE MOTOR ER20 2.2KW SPINDLE & 2.2KW DRIVE INVERTER VFD NEW. ... CNC MILLING HY WATER COOLED 2.2KW SPINDLE MOTOR AND DRIVE INVERTER VFD ER20 ... Image is loading UPDATED-0- 8KW-WATER-COOLED-DIAMETER-65MM-SPINDLE- .... Speed: 0-24000RPM.
https://www.ebay.com/itm/UPDATED-0-8KW-WATER-COOLED-DIAMETER-65MM-SPINDLE-MOTOR-ENGRAVING-MILL-GRIND-/254152335296

MPCNC tool mount 80mm 2.2kW spindle(water cooled) + 1.5kW ...

Dec 14, 2016 ... MPCNC tool mount 80mm 2.2kW spindle(water cooled) + 1.5kW version ... Hi, i will use the 65mm stl file for mine 0,8kw spindle on the mpcnc ...
https://www.thingiverse.com/thing:1964028/comments

Water-cooledThermo-chiller

The water-cooled Thermo-chiller which does not use a compressor ... Operating conditions: 140°F (60°C), 0 kW with 50% load, 8 kW with 50% load. Existing.
http://www.smcpneumatics.com/pdfs/HRW.pdf

Production level aluminum milling with .8KW water cooled VFD - X ...

Since switching I have had zero controller caused issues. Now just ... Closed loop .8KW water cooling system mounted atop mill enclosure.
https://discuss.inventables.com/t/production-level-aluminum-milling-with-8kw-water-cooled-vfd/13557

Zero Water Z-Bottle Water Filtration System-ZJ-003 - The Home Depot

ZeroWater Z-bottle Filtration System - Fits standard water cooler. Cost effective way to obtain clean, great tasting water. Includes Zerowater Z-bottle filtration ...
https://www.homedepot.com/p/Zero-Water-Z-Bottle-Water-Filtration-System-ZJ-003/100590772

Home Generator Parts and Accessories - Generac Power Systems

*This system is compatible with air-cooled and liquid-cooled models that utilize LP as a fuel source. The Tank Utility application is available for iOS and Android  ...
http://www.generac.com/all-products/parts-accessories/home-backup

Briggs & Stratton 48,000-Watt Automatic Liquid Cooled Standby ...

Briggs & Stratton Automatic Liquid Cooled Standby Generator Single Phase ... Fuel Tank Capacity (gallons). 0. Full load fuel consumption (gallons/hour). 5.5.
https://www.homedepot.com/p/Briggs-Stratton-48-000-Watt-Automatic-Liquid-Cooled-Standby-Generator-Single-Phase-076150/207044826

China 8kw Single Cylinder Water Cooled Diesel Generator with ...

China 8kw Single Cylinder Water Cooled Diesel Generator with New Design, Find details about China ... Fuel, 0#(summer) -10#(winter) -35#(chillness) diesel.
https://kanpor.en.made-in-china.com/product/eNvJETcHhAhs/China-8kw-Single-Cylinder-Water-Cooled-Diesel-Generator-with-New-Design.html

Chillers

There are over 50 air and water cooled models to choose from, with cooling powers from 0,3 to 50 kW. Efficient energy management in all Huber chillers ensures ...
https://www.huber-online.com/us/product_listing.aspx%3Fgroup%3D2.

Water cooled spindle | OpenBuilds

This is the reason why I want a water cooled spindle, less noisy. I plan to build an ... Actually, he ordered the .8 KW spindle. davels said: ↑.
https://openbuilds.com/threads/water-cooled-spindle.10039/

ZeroWater ZJ-003 Water Cooler Filtration System (Water Cooler not ...

ZeroWater ZJ-003 (also known as the J-20) Water Cooler Filtration System saves .... With the Zero system, you pour water into the top tank as it sits on the cooler.
https://www.walmart.com/ip/ZeroWater-ZJ-003-Water-Cooler-Filtration-System-Water-Cooler-not-included/13724339

Recirculating Chillers | Thermo Fisher Scientific - US

Air-cooled and water-cooled chillers put off heat to a room, but the amount varies depending on the type and amount of power used. This video shows you how ...
https://www.thermofisher.com/us/en/home/life-science/lab-equipment/water-baths-circulators-chillers/recirculating-chillers.html

Commetns kolpino.a-snova.ru :